INTERFACE BRACKET - The Interface Bracket is milled from 1/4" thick high-grade
aluminum steel. (4) 4mm holes are drilled and tapped to create the 100mm x 100mm
VESA interface. (4) 1/4" holes are drilled and tapped to receive the bumpers that keep
the adapter snug to the stand of the iMac. A 50mm hole is also milled to receive the Nut &
Bolt assembly through the cable hole of the stand. The Nut & Bolt assembly is hollow to
allow for the hole to still function as a cable organizer. The bracket is then finished with a
durable powder-coat finish.
NUT & BOLT FASTENER SYSTEM - The Nut & Bolt assembly is CNC Lathed from a 3-1/4" solid
round of high-grade aluminum steel. The above pictures show the many details completed. The
parts are then finished with a clear anodize and rubber o-rings are fitted.
SPACER - The Spacer is used for the 20"
iMac Aluminum Model and is CNC Lathed
from a solid round of Delrin, which is a
high performance acetal homopolymer.
iMac VESA Adapter Kit - COMPONENTS
BUMPERS - Bumpers are fabricated
from 1/4" round solid steel, then black
oxide. Black plastic caps are included.
INSTALLATION KIT - The Installation Kit includes: directions, (4)
4mm x 12mm mount screws with lock washers, (1) tool, and (2)
felt strips. The screws are high-grade from Holo-Krome.
Our goal was to develop a VESA 100 mount for the Apple iMac computers that was both
functional and esthetically suitable. This VESA 100 mount system was created to fill a void for
Apple iMac users to allow for the mounting of their iMac computer models that were otherwise
considered VESA non-compliant or unmountable. To provide more value to the user, the VESA
100 mount needed to be interchangeable with both the 17" iMac and 20" iMac computer, and
now with the new aluminum iMac 20".

We designed the VESA 100 mount to bolt directly to the stand of the Apple iMac. Although the
stands are different in width between the 17" iMac and 20" iMac computers, the cable hole is the
same size for both. With the new aluminum iMac 20", the stand is the same size as with the
previous 20" iMac, but the cable hole has been slightly modified. We address this modification
with a nylon insert included with every VESA 100 mount kit.

With the VESA 100 mount attached, your iMac now complies with the VESA MIS-D, 100, C
version specification and will connect to any VESA-compliant wall mount or VESA articulating
mount system having a 100 x 100 mm mount attachment. For a wall mount, your mount system
must provide at least 2" of clearance from the wall to allow room for the iMac stand.

Note: VESA wall mount, articulating arm and Apple iMac computers are not included.
2007-2008 imacmount.com | BMS Michigan All Rights Reserved.
iMac is a registered trademark of Apple Computer. imacmount.com is in no way associated with Apple Computer, Inc.